Ground Stackable Line Array System View larger

DYNACORD GROUND STACKABLE LINE ARRAY SYSTEM

DYNCOBRA-2PWH-H

New product

Ground Stackable Line Array System

More details

The COBRA-2 SYSTEM is designed to provide high-quality sound reinforcement for events in small to medium-sized marquees or halls covering distances up to 40 metres and areas in the region of 1,000 square metres.

The COBRA-2 SYSTEM produces a maximum SPL of 137 dB L +137 dB R in the medium-and high frequency ranges and up to 141 dB in the bass. In its basic configuration, the COBRA-2 SYSTEM consists of four COBRA TOP midrange/high-frequency enclosures, four COBRA SUB subwoofers, a ready cabled and programmed 12 U amp rack,the CSR-H2P, as well as the necessary 4-core loudspeaker cables and a 2.5° wedge set (comprising a pair of wedges that can be placed at the front or back of the cabinets) to aim the COBRA TOPs at the listening area.

The coverage pattern of the COBRA-2 SYSTEM is 120° in the horizontal plane and 15° in the vertical. Up to six COBRA TOPs and six COBRA SUBs can be driven by the CSR-12 AMP RACK without difficulty. To allow for expansion of the system, the CSR-12 has room for an additional 3U power amplifier (sub extension,separate front-/side-fill or monitor), which gets its current from the CP-44 connector panel. The largest sensible configuration of the COBRA-2 SYSTEM consists of one COBRA-2 array per side (four TOPs and 4-6 SUBs per side).

For especially powerful and penetrating bass reproduction, suitable for a wide range of types of music and venue, COBRA PWH bass horns can be integrated into the COBRA-2 SYSTEM. Since doubling the number of COBRA TOP enclosures halves their vertical radiation angle, special attention must be paid to the way they are aligned – regardless of whether they are flown or stacked. A COBRA TOP has a coverage pattern of 120° x 30° (horizontal and vertical). Two COBRA TOPs stacked directly on top of one another have a coverage pattern of 120° x 15° and four stacked cabinets, 120° x 7.5°.

All equipment is installed in a secure rack case on wheels with size 10 U which includes :

1 x R10 Rack

2 x H 2500 Amplifiers

2 x RCM 26 or RCM 28 Controller Modules

1 x ICP 48 NF Panel

1 x AC 232 Connector Panel

4 x Male 1 metre XLR cable

System Configuration

4 x Cobra-PWH Basshorn Cabinet

4 x Cobra-4 Top 3Way Top Cabinet

1 x CSR H2P Rack

4 x PSS 401 Speakon Cable

2 x PSS 404 Speakon Cable

2 x PSS 415 Speakon Cable

1 x CSW 25 Wedge Set

  • Colour Black
  • Coverage (H x V) See Data Sheet
  • Dimensions (H x W x D) See Data Sheet
  • Frequency Response See Data Sheet
  • Impedance 8 ohm
  • Material Birch plywood
  • Maximum SPL 131 dB
  • Power Rating 600 watt (RMS) 2400 watt (Peak)
  • Warranty 3 Years
  • Weight See Data Sheet

6 other products in the same category:

Line Array

Viewed Products